TOP PIPE (Vire 7 Exhaust Jacket To Cylinder pipe) - refurbished

52034 - used

Refurbished

TOP PIPE for Vire 7

REFURBISHED

metal (low corrosion), straight/bent

More details

1 Item

Warning: Last items in stock!

£ 14.00

More info

  • METAL PIPE
  • REFURBISHED - nickel plating may have gone but brass ok
  • original Vire part, not a copy
  • prevents misalignment or collaps of the 'top hose'
  • ensures that water injected into cylinder is directed downwards starboard side (outlet water is taken invisibly from insider port upper area) - 
  • important for proper cooling circulation of entire cylinder.
  • Special material will withstand corrosion and crushing from installation and jubilee clip.
  • Correct bore, diameters - avoiding leaks.
  • To replace, the water pump pipe clip and 4 exhaust nuts need removing - allowing exhaust to move 2 inches aft(where your boat allows), this may require a new exhaust-cylinder gasket unless you are careful to save it and use sealant. please use my uprated 'top hose' when replacing this pipe. 

Note, if your top hose has been leaking for a while, it probably has damaged the smoothness of the aluminium socket in the silencer 67752, in that case you can exchange it with me, or i sell a repair seat kit. if your socket is not smooth it cannot seal properly.

because you may need to remove silencer to obtain top access to service your pump, it is wise to carry spare top-hose in this event!