Vire 6 & 7 Diapragm Carb (Typically 286/260 models) The picture...
Vire 6hp engine, had a round cylinder shape, or model 'BV' most commonly with a Reversing gearbox from Circa 1959 model 'BVR'. produced until 1973
New improved protection GEAR OIL for the Vire 6, Vire 7 or Vire 12 engines , sad as CASTROL EPX had increased lithium. No Longer avail, use std hypoy gear oil instead (avail locally) normal viscosity 80/90 for 5-30 centigrade countries
HT lead for the Vire 7, 12 or Vire 6 BVR engines. RED Correct Vire resistance , to gaurantee reliability and spark strength. correct length for the Vire engines. Stranded metal core to prevent corrosion and leakage. Assists reliable quick starting in damp conditions and correct running.
Specially made for Vire motors only. Pressed from sheet steel by precision engineers Elctro-plated with Zinc Exceeds Original specification Full set https://www.youtube.com/watch?v=gbUWPmfioqc
HT Cap upgrade for the Vire 7, 12 or Vire 6 BVR engines. Correct Vire inbuilt resistance suppression, to gaurantee reliability and stop interference with your VHF etc. Waterproof HT boots on each end to prevent ignition corrosion and leakage
REFURBISHED Tillotson HL carb for vire 7 or 6 (model HL 286A or HL 260A equiv and others) EXCHANGE - you agree to return your old carburettor within 28 days (return addressed bag included you pay postage £30 refund conditional - read below Choke Lever option: The original carburettor had a small adjustable lever this was ideal for remote cable operation
HYLOMAR Gasket sealant 40g tube (non-setting) The only gasket sealant reccomended by Vire UK
CIRCLIP, stainless steel, (for retaining a PUMP SHAFT SEAL)
kit for replacing and upgrading your pump shaft seals; 3 x double lipped seals (3 are better than 2 and will fit) 2 x s/s retaining clip (old steel ones rust and not normally re-usable)
RE-furbished, the shaft seal area is uprated to Stainless-steel, correcting an original saltwater design fault. Exchange; I need to charge you +£100 deposit, refundable on return of your old assembly within 28 days. Then i will refund your £100