Vire 12hp model produced Circa 1975-2002.
Identifiable by the spark plug being on the front of the cylinder. Bing float carburettor with seperate bing pump under it. Electric solenoid starting choke originally used.
RE-furbished, the shaft seal area is uprated to Stainless-steel, correcting an original saltwater design fault. Exchange; I need to charge you +£100 deposit, refundable on return of your old assembly within 28 days. Then i will refund your £100
1 pair only solid/joined/shaped mahogany, with coach bolts, varnidhed, a bit dirty from age al threads inspected and greased by me, you can add washers under your engine to adjust trim. ideal if your engine bearers got rotten and soft with age, you can get a shipright to install these or flass fibre them in.
Teleflex Dual action (gear & throttle) inboard engine control lever, recommended model for the VIRE inboard engines. (See full description for specific requirements). vire part number 58170 Features • Dual action (throttle and shift in one lever)• Flush mount design • Neutral “warm up” button for throttle only operation • will fit standard teleflex...
10 micron, disposable, FIRE-RETARDANT METAL Disposable filter for (8mm) Pipe hose (inside diameter) You must have a fuel filter for all vire engines, this one will NOT remove saltwater/water, but it will remove fine salts and grit if you cannot afford a desalinating filter, then please have one of these at least!
40 micron, servicable (may be disassembled to clean) METAL & GLASS Disposable filter for Pipe hose (6mm inside diameter) You must have a fuel filter for all vire engines, this one will NOT remove saltwater/water, but it will remove and grit if you cannot afford a desalinating filter, then please have one of these at least!
brass/anodised collar this fits between the tip and spring , of the electric starting choke solenoid on a vire 12 engine
for BOSCH not DELCO dynastarts 2 special Bolts for fixing dynastart to engine; 1 Pair of Stainless Steel Allen (Hex) Bolts, includes precise shoulders, nylock nuts
PUMP PLATE NEW RARE ORIGINAL (zero wear) this is the BRONZE plate that fits between the gearbox casting gasket, and the pump housing gasket (vire #52120 in the 1992 parts manual ;page p25 #5) for 7 & 12 hp models (rubber impellor, high efficiency, self-priming)
Bracket for attatching remote control to gear lever 2 x sides 2 x nuts & bolts BZP steel finish original VALMET part not copy
Original part Vire NOS - likley the only one left in the world.
Brand new - you’ll receive polished and shiny Price is high as this is the last known new one , please ask for cheaper refurbished used ones below instead
REFURBISHED USED - you’ll receive polished and shiny