Vire 12hp model produced Circa 1975-2002.
Identifiable by the spark plug being on the front of the cylinder. Bing float carburettor with seperate bing pump under it. Electric solenoid starting choke originally used.
Vire 12 inner pipe, baffle fits inside Exhaust( stainless steel upgrade)
4 x PUMP GASKETS 2022 - improved LASER-cut design, easier to align and use, stronger, more accurate. essential spares, just in case! for 7 & 12 hp models (rubber impellor, high efficiency, self-priming) precise thickness required to seal impellor correctly, maximum pump performance, minimum pump wear. top quality specialist gasketmaterial, oil/salt...
NEW CHARGING REGULATOR ( for Delco-Remy type dynastarts NOT BOSCH) with connectors kit, wiring diagram. 12 months warranty. Loyalty discount on related equipment and free Technical support for life. moisture-sealed unit, marine approved
NEW CHARGING REGULATOR ( for Delco-Remy type dynastarts NOT BOSCH) with connectors kit, wiring diagram. 12 months warranty. Loyalty discount on related equipment and free Technical support for life. moisture-sealed unit, marine approved
Puller kit to remove the flywheel, all vire models NEW 2021, custom designed and tested by myself on all vire engine models this is improved as it is stronger steel, finer pitch central bolt in a hub that stays flat and true unlike previous versions - see full description about the 2021 enhancements
VIRE OFFICIAL TOOL kit 2021 for most maintenance and quickly get going, save you time and trips to boat, many essentials and rarely needed tools NOTE: does NOT include flywheel puller, please search for "PULLER" or see website suggestions below or order "TOOL KIT FULL" NOTE: torch requires 3x1.5V-AAA and meter requires 1x9V, however due to courier...
TOOL kit for most maintenance and quickly get going, save you time and trips to boat, many essentials and rarely needed tools NEW 2021, custom designed and tested by myself on all vire engine models NOTE: does include flywheel puller
Pull cord (starting rope) every boat should have one, in case of flat battery or electrical problems. correct length and diameter with secure melted knotted end https://www.youtube.com/watch?v=bVLcWCKSwtw
REFURBISHED/Tested CHARGING REGULATOR ( for BOSCH/SIBA type dynastarts ) with wiring diagram. 12 months warranty. Loyalty discount on related equipment and free Technical support for life. electro-mechanical version automotive quality, not suitable for salty bilges 20A rated
NEW for 2021 fits above the flywheel holds the 4 wires from the ignition
REFURBISHED/Tested (but 40-60 years old!) rare original BOSCH manuf 1960-1980 (obsolete) part number Vire 52111 / bosch 0190219001 CHARGE (0-20A)/voltage (14V) REGULATOR & starting solenoid combined ( for BOSCH (EU) type dynastarts NOT Delco(pacific)) electro-mechanical version (solid state is 2x more efficient charging than this)
RE_usable part if you lost or damaged it and cannot make one, email me, i do have some new ones i hold in reserve for emergencies. i dont offer for sale online because i would sell loads that simply are not needed.